How to Replace the HP Pavilion ZV5000 ZV6000 ZX5000 15" LCD Hinges

Hinges for HP V5000 ZV5000 ZV6000 ZX5000 15 inch Display

$

37.50    

 

 

Specification: Left & Right Hinge set For 15" Display ( If 15.4", please click here)
Unit: Pair (left one and right one)
Type: Laptop LCD Hinges
Condition: refurbishment
Warranty: 3 Months
Weight: 50.00 g
Availability: in stock
Payment | Delivery:  PayPal | HongKong Registered Air Mail With Tracking Number

Compatible Hinges Part#

AMHR6319010     AMHR631C010

Compatible Laptop Model#

HP Pavillion ZV5000 Series    HP Pavillion ZV6000 Series     HP Pavillion ZX5000 Series

More information, please refer to our website www.battery-adpater.com.

How to Replace HP Pavilion ZV5000 ZV6000 ZX5000 Hinges

This guides applies to the laptop HP Pavilion ZV5000, HP Pavilion ZX5000, HP Pavilion ZV6000 and all the laptop models which are listed in above product information. In this case, the laptop is HP Pavilion ZV5000.

1. Shut down the HP ZV5000. Disconnect all external devices connected to the notebook and  the power cord. And remove  the battery.

2. There are six rubber screw covers on the LCD screen bezel. You’ll have to remove all covers. You can remove covers with a sharp object. Remove six screws found under the rubber covers.

3. Take off the strip cover above the keyboard. You can find details  in the other guide of How to Replace HP Pavilion ZV5000, ZX5000 Keyboard.  Removed the screws securing the display hinges/brackets to the computer.

4. Separate the screen bezel and display cover. Be careful, the bezel made of fragile plastic. Remove the screen bezel .

5. Now you can get an access to the screen inverter which is mounted below the screen. Remove one screw securing the inverter board.. Disconnect cables on both sides of the inverter board.

6. Disconnect cables on both sides of the inverter board. If you want to replace the HP Pavilion ZV5000 inverter, it is just the time.

7. Remove two screws securing each display hinge/bracket.  Now you can get an access to the back side of the LCD screen. Remove clear tape covering the connector and disconnect the screen cable from the LCD screen. Simply unplug the cable from the connector.

8. Remove two screws from each side of the screen. These screws securing the display hinges/brackets to the screen.

9. Now, you can install your new HP Pavilion ZV5000 / ZX5000/ ZV6000 LCD hinges

Note: HP Pavilion ZV5000, ZX5000, ZV6000 have two types, one is 15.4" LCD and the other one is for 15" LCD, so their inverters & hinges have two types. Please be careful to select correct replacement.